User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Honeywell UDC 5000:Digital Controller øF
DATE:                  02-Nov-94
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       14
NUMBER OF LINES:       104
STANDARD:              Thermo Electric MM II (1)
STANDARD:              Thermo Electric MM II (2)
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
# This procedure is run with the MET/CAL Configuration #1 loaded.
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  HEAD         ÍÍINITIAL CONDITIONS ÍÍ
  1.004  DISP         Required Equipment:
  1.004  DISP
  1.004  DISP         Thermo Electric MicroMite II Calibrator; here by refered
  1.004  DISP         to as the MM II.
  1.005  OPBR         Is the MM II's DTB number 25-30?
  1.006  JMPF         1.009
  1.007  STD          Thermo Electric MM II (1)
  1.008  JMP          1.010
  1.009  STD          Thermo Electric MM II (2)
  1.010  DISP         Connect a "T" type connector with "T" type T/C wire
  1.010  DISP         to UUT as follows:
  1.010  DISP         ÿ   [27][91]1m        MMII         TO      UDC 5000
  1.010  DISP         ÿ       OUTPUT + ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ terminal #22
  1.010  DISP         ÿ       OUTPUT - ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ terminal #23
  1.011  HEAD         {}
  1.012  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.013  HEAD         {º ThermoCouple Tests º}
  1.014  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.015  HEAD         {ÍÍ "T" Type T/C ÍÍ}
  1.016  JMP          2.001
  1.017  EVAL
  2.001  DISP         Set the MMII for a "T" type T/C.
  2.001  DISP         Set the output for -300.0øF.
  2.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
  2.003  ACC          -300.0øF       0.5U
  2.004  MEME
  2.005  MEMC         øF             1.0U
  3.001  DISP         Set the MMII output for -200.0øF.
  3.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
  3.003  ACC          -200.0øF       0.5U
  3.004  MEME
  3.005  MEMC         øF             1.0U
  4.001  DISP         Set the MMII output for -100.0øF.
  4.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
  4.003  ACC          -100.0øF       0.5U
  4.004  MEME
  4.005  MEMC         øF             1.0U
  5.001  DISP         Set the MMII output for 0.0øF.
  5.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
  5.003  ACC          0.0øF          0.5U
  5.004  MEME
  5.005  MEMC         øF             1.0U
  6.001  DISP         Set the MMII output for 32.0øF.
  6.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
  6.003  ACC          32.0øF         0.5U
  6.004  MEME
  6.005  MEMC         øF             1.0U
  7.001  DISP         Set the MMII output for 100.0øF.
  7.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
  7.003  ACC          100.0øF        0.5U
  7.004  MEME
  7.005  MEMC         øF             1.0U
  8.001  DISP         Set the MMII output for 200.0øF.
  8.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
  8.003  ACC          200.0øF        0.5U
  8.004  MEME
  8.005  MEMC         øF             1.0U
  9.001  DISP         Set the MMII output for 300.0øF.
  9.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
  9.003  ACC          300.0øF        0.5U
  9.004  MEME
  9.005  MEMC         øF             1.0U
 10.001  DISP         Set the MMII output for 400.0øF.
 10.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
 10.003  ACC          400.0øF        0.5U
 10.004  MEME
 10.005  MEMC         øF             1.0U
 11.001  DISP         Set the MMII output for 500.0øF.
 11.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
 11.003  ACC          500.0øF        0.5U
 11.004  MEME
 11.005  MEMC         øF             1.0U
 12.001  DISP         Set the MMII output for 600.0øF.
 12.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
 12.003  ACC          600.0øF        0.5U
 12.004  MEME
 12.005  MEMC         øF             1.0U
 13.001  DISP         Set the MMII output for 700.0øF.
 13.002  MEMI         Use keyboard to enter actual UUT reading in øFarenhite.
 13.003  ACC          700.0øF        0.5U
 13.004  MEME
 13.005  MEMC         øF             1.0U
 14.001  HEAD         {}
 14.002  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
 14.002  DISP         {º THIS COMPLETES THE VERIFICATION º}
 14.002  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
 14.003  END